Machinery - Page 1 - Page 2

POWERMATIC 10" Tilting Arbor Saws
This industrial saw is made for production.
It has a precision mitre guage that guarantees
true accuracy on even the largest stock.
The model 66 is designed for safety.
The saw guard and splitter have anti-kickback
pawls and the guard swings away easily
for blade change. The Powermatic Accu-Fence
is included as standard equipment. (Shown with optional extension table, legs, and mobile base.)

Powermatic Band Saw
The PWBS-14CS Bandsaw has an extra large,
two-piece cast iron table. It consists of
a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area
of 15" x 20". A balanced, nine-spoke
cast iron wheel makes for smooth blade travel,
and a Carter™ quick tension release lever makes blade changing easy. A micro-adjustable dual
bearing blade guide system is featured above and below the table, as well as a work lamp and chip blower. A Poly-V belt maximizes power
transmission while minimizing noise and
vibration. It has full 6" under guide capacity
with 13-1/2" frame to blade clearance.
The aluminum rip fence comes with a resaw attachment.

POWERMATIC Jointers
The 6" Jointer features three auto-set knives
that align themselves in the cutterhead for
rapid knife changes. Oversized infeed/outfeed < br>tables are mounted on dovetailed ways
and have a built-in rabbeting ledge. The fence
is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand
features a powerful motor with a non- slip v-belt Z
drive for maximum performance. The 4" dust port offers easy connection to any dust collection
system

POWERMATIC PJ882 8-Inch 2 Horsepower
Parallelogram Jointer, 230-Volt 1 Phase
Features:
* 2HP, 1Ph or 3HP, 3Ph motors
* Large 8 x 82 table surface
* 1/8 depth of cut limiter control knob
* Hand wheel fence tilting
* No-mar fence insert

POWERMATIC Planers
These ruggedly designed planers can handle a wide
variety of planing requirements. The one piece cast
iron table provides greater infeed and outfeed support
of long stock for more accurate planing. The table rollers allow rough material to feed with less friction thus improving the finish. Many other quality features
really enhance the value of these economical machines.

Powermatic LBM-21 Line Boring Machine
The Powermatic 1791301 is a Line Boring Machine.
The 21 spindle line boring machine has everything
needed to do 32 mm line boring. It’s ideal for drilling
shelf supports, hinges, etc. The LBM21 features a
powerful 2-1/2 HP motor that starts only when the
pneumatic feed cycle is activated by the foot pedal,
extending service life and saving power. The steel gears transmit plenty of power to the spindles at 2450 RPM.
The large 20" x 28" table provides plenty of work support and slides on two tracks, keeping the fence parallel to the head at all times. A 60" fence with 4 flip stops locates material with precision. Two manual head mounted index pins provide precise positioning of longer stock

POWERMATIC 3520B Lathe
Digital readout allows the user to see the exact RPM
that the spindle is turning at for more accurate
adjustments and fine tuning. Redesigned headstock
allows for better chisel angles when turning the back
side of a bowl against the headstock. Redesigned
tool rest geometry allows for better chisel movement
along the tool rest. Brass tipped knockout bar
concentrates the action in the sliding handle; the
brass tip will not mar or damage any of the drive
centers. Tool caddy mounts directly to the lathe
which allows the user to store all the necessary
tools right under the headstock Tailstock storage
keeps a chip free area to store other often used
accessories

POWERMATIC 25A Shaper
The Shaper has a spindle housing that is directly
mounted to the bottom of an extra large, heavy
cast iron table that is one of the largest in its class.
Safe, easy cutter set-up is assisted by a positive
detent spindle lock. Other features include fully adjustable work piece hold-downs, T-slot miter
gauge, 1/4" and 1/2" router bit collet adapters,
and three spindles in 1/2", 3/4" and 1" sizes