TJ Hardware, Inc.
3111 Amherst Dr NE
Albuquerque, NM 87107
(505)881-4325
(505)884-5084 fax
800-462-4266 toll free
Distributor
Of Speciality Cabinet And Woodworking Hardware Phone
800 462 4266 - Fax 505 884 5084
Pneumatic Tools
PORTER
CABLE 6 Gal. Pancake Compressor
150psi, 120V, 2 Horsepower universal-type motor runs on standard
current. The oil- free design means no spillage or work contamination.
This compressor will also operate on slopes and angles without
problems. The 6 gallon pancake-style tank has a low center of
gravity for stability. Includes ASME Safety valve, air regulator
& gauges
CPFAC2600P
Pancake Compressor $316.16
PORTER
CABLE 4 Gal. Stack Compressor
15 Amps, 120VAC, 3 Horsepower 3450 RPM induction motor runs on
standard current. The oil-free design means no spillage or contamination.
This compressor will operate on slopes and angles without problems.
Two, two-gallon side stacks tanks provides 4 gallons of air supply.
8.3 SCFM @ 40psi - 6.1 SCFM @90psi. Includes ASME Safety valve,
air
regulator & gauges, and 1/4" quick couple
C3101
Stack Compressor $399.99
PORTER
CABLE Pneumatic Air Hose
This industrial grade rubber air hose has heavy-duty spiral reinforcement,
an oil resistant inner tube, and an abrasion-resistant cover.
Has 1/4" x 3/8" male brass fittings secured with ferrules
on both ends. Rated at 300PSI.
60325
3/8 25 $27.24
60350
3/3" 50 $39.62
Recoil
Hose
Nylon coil air hose assembly for use with air tools and other
pneumatic equipment. This self- storing hose contracts to 1/30
of its maximum length.
2Z252
1/4" 1 2 $22.37
2Z253
1/4" 2 5 $30.59
Pneumatic
Accessories
These products provide quick, positive air line connections for
all types of pneumatic tools and equipment. Simple to use and
meet the highest standards in quality
PAP252
1/4" Male Plug $4.46
PAP251
1/4" Female Plug $4.64
2X492
Blow Gun $13.30
1HUK7
1/4" Female Coupler 14.28
Pneumatic
Combo Kit
7.5 HP 80-gallon industrial 2-stage compressor. Cast-iron oil-lubricated
pump with automotive pistons, rings, and connecting rods. 240-volt
induction motor with magnetic starter mounted and wired. 25 SCFM
@ 100 psi, 23.5 SCFM @ 175 psi. Three year limited warranty
CPLMC7580V2C
7.5hp 80Gal $2911.89
18
Ga., Brad Nailer Kit
Uses standard 18 Ga. brads from 3/4" to 2" long. It
has a special hardened driver blade and quick release nosepiece
for fast clearing of jams. This strong & light- weight die-cast
body has an anodized magazine with visual reload indicator. The
safety is located behind the driver guide for driving brads in
tight spaces. Includes tool, 1/4" male coupler with dust
cover, safety glasses, rugged carrying case, oil, allen wrenches,
and operating manual.
BN200B
2" Brad Nailer $129.99
Brad
Nails
BN18063
5000 5/8 $10.36
BN18075
5000 3/4" $10.84
BN18100
5000 1" $11.92
BN18125
5000 1 1/4" $14.98
BN18150
5000 1 1/2" $17.20
BN18200
5000 2" $20.84
15
Ga., Angle Nailer Kit
Uses Senco type 15 Ga. angle finish nails from 1 1/4" to
2 1/2" long. Features a special hardened driver blade with
a depth of driver gauge to match application. The rubber safety
tip prevents marring of your work. Also has a quick release nosepiece
for fast cleaning of jams, muffled adjustable exhaust port, and
strong light weight die-cast body. Aluminum magazine with hardened
steel nail rail. Includes tool, 1/4" male quick coupler with
dust cover, safety glasses, carrying case, oil and allen
wrenches, and operating manual.
