Pocket Door Slides

ACCURIDE Pro Pocket
Slide rollers run across the back of cabinet door — never touching door face! Attached brackets provide easy mounting of interior wall to conceal
sliding mechanism. Auto-open pushes cabinet door open the last 1-1/2" of travel to ensure door is fully extended. Each set accommodates door up
to 42" H and 30 lbs. Minimum stile width of door
is 2-1/2". Fits door sizes 3/4'’ to 1-1/2'’ thick. Vertical doors 42'’ high x 24'’ wide. Auto-open, anti-sag adjustment feature. Door travel equals slide length minus 4-1/2". Requires 2-1/4" side space

US FUTABA Heavey Duty TV-Pullout
225lb. load rating, full extension, ball bearing TV swivel that rotates 360 degrees. The tray is epoxy coated and designed to accept a wood tray on the top if desired.

TV Swivels
These swivels have a 200lb. load rating and full extension slides. The perfect addition to any entertainment center. Each unit has a profile of 2" and can accept a wooden tray on top

Ball-Bearing Drawer Slide Cover!
Tired of trying to figure out ways to protect quality ball-bearing slides from finishing materials. No more taping, masking, or removing and reinstalling slides to prevent damage associated with over-spray. Our reusable SLIDE COVER™ easily snaps over the ball-bearing slide fully protecting the slide members, and is easily removed with an integrated T-bar pull. 24" long. Can be cut to shorter lengths.

ACCURIDE 1-2-3 Pocket Door Slide
For horizontal and vertical concealed doors up to 42" tall
and up to 30lbs in wall units, entertain- ment centers, and cabinets. Most measuring has been eliminated and the follower strip is installed without removing the sides. Both
the slide and the hinges come in a black finish. The model 123 will accommodate inset, face frame, and overlay door styles. Supplied with 35mm hinge kit for 3/4" thick doors.
SPECIAL NOTE:
**For doors up to 1 1/4" thick and overlay doors a special hinge conversion kit with 40mm hinges is required.
**Allow 4 1/2" for the hinge plate when calculating the door
width that slides into the pocket

CONVERSION KITS (For Thick & Overlay Doors)

ACCURIDE Pocket Door for Heavy Doors
Application for vertically mounted doors up to 78" tall
or up to 75lbs. in entertainment centers, storage cabinets, and armories. The unique anti-rack cable system eliminates all door sag concerns. When taller doors are used an adjustable follower strip may be needed.
SPECIAL NOTE:
**Allow 4 1/2" for the hinge plate when calculating the door width that needs to slide into the pocket (Ex. A 22" slide will only allow 17 1/2" of the door to go into the pocket)

HINGE KITS (2 Hinges and 2 Plates)

FOLLOWER STRIPS