Saw Blades - Cutters

SYSTIMATIC Solid Surface Blade
Specifically designed to cut solid
surface materials such as Corian,
Avonite, and Royal Stone.
Advanced design cutting geometry
leaves surface edges smoother and
new hybrid carbide alloy gives you a
much more durable blade that keeps
it’s edge longer

SYSTIMATIC Melamine Blade
The perfect blade for two sided
laminates. Cuts without chipping
the laminate. This blade has a triple
chip grind with a chamfered raker
tooth and a -6 degree hook.

SYSTIMATIC Teflon Chop Saw Blade
The Bandit blades are teflon coated
to give you a smoother cut than you
can get anywhere else. Unlike other
coated blades, the Bandit can be
resharpened numerous times

Table Saw Blades
The Sawyers Choice carbide tipped saw blade is the best-valued saw blade in the country. These blades have a thick rugged plate especially suited for industrial cutting and holds a sharper edge that requires no special tooling to be resharpened while
at the same time, cost less than other brands! Each blade is 10" in dia

SYSTIMATIC Fine and Super Fine Dado Sets
The FINE dado set has (five) two-wing chippers
and (two) 22 tooth blades. The SUPER FINE
set has (six) wing round chippers and
(two) 42 tooth blades. These blades create
an absolutely smooth and perfectly square dado. Shims are available to adjust for precise widths

EURO LIMITED 32mm Boring Template
Designed to be used with the Euro-Bit
self-centering drilling tool, this eliminates
the need for hardened drill guide bushings and dramatically increases the efficiency of drilling for adjustable hardware holes. The tool features slide pins for 35mm inset positioning as well as
adjustable stops for insets greater than 35mm's.
Can be used on assembled cabinets as well as on cabinet components, steel drill guide for long life, adjustment screws for hole elevation and can be
used to drill for dowels for cabinet construction.

MORRIS Jointer and Planer Knives
Made of high quality steel for production
work. These cutters can be resharpened.
OTHER SIZES CAN BE ORDERED.

HIGH SPEED STEEL (Set of 3 Blades)

SOLID CARBIDE (Each Blade)

HER-SAF Cutter System
Reverse helix designed carbide cutters
which can be changed quickly and
easily. All cutter heads and arbors are
threaded with a 1/4"-28 thread.